[artix-build-failures] [goblins] Failure: system-config-printer

jenkins at artixlinux.org jenkins at artixlinux.org
Mon Nov 4 17:39:45 CET 2019


   Failure

   Build: repos/staging-x86_64

   Packages:

   [system-config-printer-1.5.12-2-x86_64.pkg.tar.xz]

   authorName: alium

   authorEmail: alium at artixlinux.org

   [1]https://orion.artixlinux.org/job/packagesS/job/system-config-printer
   /job/master/3/

References

   1. https://orion.artixlinux.org/job/packagesS/job/system-config-printer/job/master/3/
-------------- next part --------------
Push event to branch master
Querying the current revision of branch master...
Current revision of branch master is 6ab82c0e13c4e1995942bda2399dd1ee034ab8bc
Obtained Jenkinsfile from 6ab82c0e13c4e1995942bda2399dd1ee034ab8bc
Running in Durability level: PERFORMANCE_OPTIMIZED
Loading library artix-ci at master
Attempting to resolve master from remote references...
 > git --version # timeout=10
 > git ls-remote -- https://gitea.artixlinux.org/artix/pipeline-libs.git # timeout=10
Found match: refs/heads/master revision 77f77ff85eedb6eb60b64faf8c328ab86dbb479c
Warning: CredentialId "gitea-ci" could not be found.
 > git rev-parse --is-inside-work-tree # timeout=10
Fetching changes from the remote Git repository
 > git config remote.origin.url https://gitea.artixlinux.org/artix/pipeline-libs.git # timeout=10
Fetching without tags
Fetching upstream changes from https://gitea.artixlinux.org/artix/pipeline-libs.git
 > git --version # timeout=10
 > git fetch --no-tags --force --progress -- https://gitea.artixlinux.org/artix/pipeline-libs.git +refs/heads/master:refs/remotes/origin/master # timeout=10
Checking out Revision 77f77ff85eedb6eb60b64faf8c328ab86dbb479c (master)
 > git config core.sparsecheckout # timeout=10
 > git checkout -f 77f77ff85eedb6eb60b64faf8c328ab86dbb479c # timeout=10
Commit message: "Notify: remove fail condition"
[Gitea] Notifying branch build status: PENDING Build started...
[Gitea] Notified
[Pipeline] Start of Pipeline
[Pipeline] node
Still waiting to schedule task
Waiting for next available executor
Running on Jenkins in /build/jenkins/workspace/esS_system-config-printer_master
[Pipeline] {
[Pipeline] timestamps
[Pipeline] {
[Pipeline] stage
[Pipeline] { (Prepare)
[Pipeline] checkout
[2019-11-04T16:37:08.612Z] Warning: CredentialId "jenkins-ci" could not be found.
[2019-11-04T16:37:08.612Z]  > git rev-parse --is-inside-work-tree # timeout=10
[2019-11-04T16:37:08.616Z] Fetching changes from the remote Git repository
[2019-11-04T16:37:08.616Z]  > git config remote.origin.url https://237b7412742b4068af4173944de150f12959f4d3@gitea.artixlinux.org/packagesS/system-config-printer.git # timeout=10
[2019-11-04T16:37:08.621Z] Cleaning workspace
[2019-11-04T16:37:08.621Z]  > git rev-parse --verify HEAD # timeout=10
[2019-11-04T16:37:08.625Z] Resetting working tree
[2019-11-04T16:37:08.625Z]  > git reset --hard # timeout=10
[2019-11-04T16:37:08.636Z]  > git clean -fdx # timeout=10
[2019-11-04T16:37:08.640Z] Fetching without tags
[2019-11-04T16:37:08.640Z] Fetching upstream changes from https://237b7412742b4068af4173944de150f12959f4d3@gitea.artixlinux.org/packagesS/system-config-printer.git
[2019-11-04T16:37:08.640Z]  > git --version # timeout=10
[2019-11-04T16:37:08.643Z]  > git fetch --no-tags --force --progress -- https://237b7412742b4068af4173944de150f12959f4d3@gitea.artixlinux.org/packagesS/system-config-printer.git +refs/heads/master:refs/remotes/origin/master # timeout=10
[2019-11-04T16:37:08.936Z] Checking out Revision 6ab82c0e13c4e1995942bda2399dd1ee034ab8bc (master)
[2019-11-04T16:37:08.936Z]  > git config core.sparsecheckout # timeout=10
[2019-11-04T16:37:08.940Z]  > git checkout -f 6ab82c0e13c4e1995942bda2399dd1ee034ab8bc # timeout=10
[2019-11-04T16:37:08.948Z] Commit message: "[trunk] -> [staging] 'system-config-printer-1.5.12-2' add"
[2019-11-04T16:37:08.948Z]  > git rev-list --no-walk 06ec038607f13de15439751e216bc98e483e3017 # timeout=10
[2019-11-04T16:37:08.959Z] [Gitea] Notifying branch build status: PENDING Build started...
[2019-11-04T16:37:09.091Z] [Gitea] Notified
[Pipeline] libraryResource
[Pipeline] readYaml
[Pipeline] sh
[2019-11-04T16:37:09.364Z] + git rev-parse @
[Pipeline] sh
[2019-11-04T16:37:09.621Z] + git show -s --format=%an 6ab82c0e13c4e1995942bda2399dd1ee034ab8bc
[Pipeline] sh
[2019-11-04T16:37:09.878Z] + git show -s --format=%ae 6ab82c0e13c4e1995942bda2399dd1ee034ab8bc
[Pipeline] sh
[2019-11-04T16:37:10.135Z] + git show --pretty=format: --name-status 6ab82c0e13c4e1995942bda2399dd1ee034ab8bc
[Pipeline] fileExists
[Pipeline] sh
[2019-11-04T16:37:10.437Z] + pkg2yaml repos/staging-x86_64
[Pipeline] readYaml
[Pipeline] }
[Pipeline] // stage
[Pipeline] stage
[Pipeline] { (Build)
[Pipeline] input
[2019-11-04T16:37:10.502Z] Input requested
[2019-11-04T16:39:07.243Z] Approved by artoo
[Pipeline] echo
[2019-11-04T16:39:07.297Z] isRebuild: false
[Pipeline] dir
[2019-11-04T16:39:07.303Z] Running in /build/jenkins/workspace/esS_system-config-printer_master/repos/staging-x86_64
[Pipeline] {
[Pipeline] sh
[2019-11-04T16:39:07.569Z] + buildpkg-goblins
[2019-11-04T16:39:09.432Z] :: Synchronizing package databases...
[2019-11-04T16:39:09.432Z]  goblins is up to date
[2019-11-04T16:39:09.432Z]  gremlins is up to date
[2019-11-04T16:39:09.432Z]  system is up to date
[2019-11-04T16:39:09.432Z]  world is up to date
[2019-11-04T16:39:09.432Z] downloading galaxy-goblins.db...
[2019-11-04T16:39:09.432Z]  galaxy-gremlins is up to date
[2019-11-04T16:39:09.432Z]  galaxy is up to date
[2019-11-04T16:39:09.432Z]  staging is up to date
[2019-11-04T16:39:09.432Z]  testing is up to date
[2019-11-04T16:39:09.432Z]  extra is up to date
[2019-11-04T16:39:09.432Z]  community-staging is up to date
[2019-11-04T16:39:09.432Z]  community-testing is up to date
[2019-11-04T16:39:09.432Z]  community is up to date
[2019-11-04T16:39:09.432Z] :: Starting full system upgrade...
[2019-11-04T16:39:09.432Z]  there is nothing to do
[2019-11-04T16:39:09.982Z] ==> Building in chroot for [goblins] (x86_64)...
[2019-11-04T16:39:10.893Z] ==> Synchronizing chroot copy [/build/buildpkg/goblins-x86_64/root] -> [jenkins]...done
[2019-11-04T16:39:11.804Z] ==> Making package: system-config-printer 1.5.12-2 (Mon Nov  4 17:39:11 2019)
[2019-11-04T16:39:11.804Z] ==> Retrieving sources...
[2019-11-04T16:39:11.804Z]   -> Found system-config-printer-1.5.12.tar.xz
[2019-11-04T16:39:11.804Z] ==> Validating source files with sha256sums...
[2019-11-04T16:39:11.804Z]     system-config-printer-1.5.12.tar.xz ... Passed
[2019-11-04T16:39:15.032Z] ==> Making package: system-config-printer 1.5.12-2 (Mon 04 Nov 2019 05:39:14 PM CET)
[2019-11-04T16:39:15.032Z] ==> Checking runtime dependencies...
[2019-11-04T16:39:15.032Z] ==> Installing missing dependencies...
[2019-11-04T16:39:15.032Z] resolving dependencies...
[2019-11-04T16:39:15.032Z] :: There are 2 providers available for libjpeg:
[2019-11-04T16:39:15.032Z] :: Repository world
[2019-11-04T16:39:15.032Z]    1) libjpeg-turbo
[2019-11-04T16:39:15.032Z] :: Repository extra
[2019-11-04T16:39:15.032Z]    2) libjpeg-turbo
[2019-11-04T16:39:15.032Z] 
[2019-11-04T16:39:15.032Z] Enter a number (default=1): 
[2019-11-04T16:39:15.032Z] :: There are 2 providers available for xproto:
[2019-11-04T16:39:15.032Z] :: Repository world
[2019-11-04T16:39:15.032Z]    1) xorgproto
[2019-11-04T16:39:15.032Z] :: Repository extra
[2019-11-04T16:39:15.032Z]    2) xorgproto
[2019-11-04T16:39:15.032Z] 
[2019-11-04T16:39:15.032Z] Enter a number (default=1): 
[2019-11-04T16:39:15.032Z] looking for conflicting packages...
[2019-11-04T16:39:15.032Z] warning: dependency cycle detected:
[2019-11-04T16:39:15.032Z] warning: harfbuzz will be installed before its freetype2 dependency
[2019-11-04T16:39:15.032Z] warning: dependency cycle detected:
[2019-11-04T16:39:15.032Z] warning: libglvnd will be installed before its mesa dependency
[2019-11-04T16:39:15.032Z] 
[2019-11-04T16:39:15.032Z] Package (114)                          New Version                 Net Change  Download Size
[2019-11-04T16:39:15.032Z] 
[2019-11-04T16:39:15.032Z] world/adobe-source-code-pro-fonts      2.030ro+1.050it-5             2.17 MiB               
[2019-11-04T16:39:15.032Z] world/adwaita-icon-theme               3.34.0-1                     23.11 MiB               
[2019-11-04T16:39:15.032Z] world/alsa-lib                         1.1.9-2                       2.00 MiB               
[2019-11-04T16:39:15.032Z] world/at-spi2-atk                      2.34.1-1                      0.25 MiB               
[2019-11-04T16:39:15.032Z] world/at-spi2-core                     2.34.0-1                      2.77 MiB               
[2019-11-04T16:39:15.032Z] world/atk                              2.34.1-1                      4.38 MiB               
[2019-11-04T16:39:15.032Z] goblins/avahi                          0.7+18+g1b5f401-3             1.92 MiB               
[2019-11-04T16:39:15.032Z] galaxy-goblins/brotli                  1.0.7-3                       2.27 MiB               
[2019-11-04T16:39:15.032Z] world/cairo                            1.17.2+17+g52a7c79fd-2        3.47 MiB               
[2019-11-04T16:39:15.032Z] world/cantarell-fonts                  1:0.111-1                     0.72 MiB               
[2019-11-04T16:39:15.032Z] world/colord                           1.4.4+9+g1ce26da-1            7.50 MiB               
[2019-11-04T16:39:15.032Z] system/dbus                            1.12.16-2                     1.03 MiB               
[2019-11-04T16:39:15.032Z] world/dconf                            0.34.0-1                      0.55 MiB               
[2019-11-04T16:39:15.032Z] world/desktop-file-utils               0.24-1                        0.24 MiB               
[2019-11-04T16:39:15.032Z] system/elogind                         241.3-5                       3.22 MiB               
[2019-11-04T16:39:15.032Z] system/eudev                           3.2.9-1                       7.87 MiB               
[2019-11-04T16:39:15.032Z] world/fontconfig                       2:2.13.91+24+g75eadca-1       2.23 MiB               
[2019-11-04T16:39:15.032Z] world/freetype2                        2.10.1-1                      1.61 MiB               
[2019-11-04T16:39:15.032Z] world/fribidi                          1.0.7-1                       0.25 MiB               
[2019-11-04T16:39:15.032Z] world/gdk-pixbuf2                      2.40.0-1                      4.95 MiB               
[2019-11-04T16:39:15.032Z] world/glib-networking                  2.62.1-1                      1.12 MiB               
[2019-11-04T16:39:15.032Z] goblins/gobject-introspection-runtime  1.62.0-3                      0.80 MiB               
[2019-11-04T16:39:15.032Z] world/graphite                         1:1.3.13-2                    0.76 MiB               
[2019-11-04T16:39:15.032Z] world/gsettings-desktop-schemas        3.34.0-1                      4.59 MiB               
[2019-11-04T16:39:15.032Z] world/gtk-update-icon-cache            1:3.24.12+32+g39e28ab933-1    0.03 MiB               
[2019-11-04T16:39:15.032Z] world/harfbuzz                         2.6.4-1                       4.48 MiB               
[2019-11-04T16:39:15.032Z] world/hicolor-icon-theme               0.17-1                        1.50 MiB               
[2019-11-04T16:39:15.032Z] system/hwids                           20190818-1                    1.72 MiB               
[2019-11-04T16:39:15.032Z] world/iso-codes                        4.3-1                        19.24 MiB               
[2019-11-04T16:39:15.032Z] world/jasper                           2.0.16-1                      1.39 MiB               
[2019-11-04T16:39:15.032Z] world/js60                             60.9.0-1                     55.42 MiB               
[2019-11-04T16:39:15.032Z] world/json-glib                        1.4.4-1                       2.09 MiB               
[2019-11-04T16:39:15.032Z] system/kbd                             2.2.0-4                       3.13 MiB               
[2019-11-04T16:39:15.032Z] world/kexec-tools                      2.0.20-1                      0.24 MiB               
[2019-11-04T16:39:15.032Z] system/kmod                            26-3                          0.47 MiB               
[2019-11-04T16:39:15.032Z] world/lcms2                            2.9-2                         0.67 MiB               
[2019-11-04T16:39:15.032Z] world/libcanberra                      0.30+2+gc0620e4-2             0.48 MiB               
[2019-11-04T16:39:15.032Z] world/libcups                          2.3.0-4                       0.83 MiB               
[2019-11-04T16:39:15.032Z] world/libdaemon                        0.14-4                        0.09 MiB               
[2019-11-04T16:39:15.032Z] world/libdatrie                        0.2.12-1                      0.11 MiB               
[2019-11-04T16:39:15.032Z] world/libdrm                           2.4.100-1                     0.98 MiB               
[2019-11-04T16:39:15.032Z] system/libedit                         20191025_3.1-1                0.25 MiB               
[2019-11-04T16:39:15.032Z] world/libepoxy                         1.5.3-1                       3.26 MiB               
[2019-11-04T16:39:15.032Z] world/libglvnd                         1.2.0-5                       3.64 MiB               
[2019-11-04T16:39:15.032Z] world/libgudev                         233-1                         0.40 MiB               
[2019-11-04T16:39:15.032Z] world/libgusb                          0.3.0-1                       0.51 MiB               
[2019-11-04T16:39:15.032Z] world/libjpeg-turbo                    2.0.3-1                       2.16 MiB               
[2019-11-04T16:39:15.032Z] system/libnsl                          1.2.0-1                       0.21 MiB               
[2019-11-04T16:39:15.032Z] world/libogg                           1.3.4-1                       0.49 MiB               
[2019-11-04T16:39:15.032Z] world/libomxil-bellagio                0.9.3-2                       0.62 MiB               
[2019-11-04T16:39:15.032Z] world/libpciaccess                     0.16-1                        0.09 MiB               
[2019-11-04T16:39:15.032Z] world/libpng                           1.6.37-1                      0.61 MiB               
[2019-11-04T16:39:15.032Z] goblins/libproxy                       0.4.15-13                     0.33 MiB               
[2019-11-04T16:39:15.032Z] world/librsvg                          2:2.46.3-1                    4.21 MiB               
[2019-11-04T16:39:15.032Z] system/libseccomp                      2.4.1-2                       0.68 MiB               
[2019-11-04T16:39:15.032Z] world/libsoup                          2.68.2-1                      5.36 MiB               
[2019-11-04T16:39:15.032Z] world/libthai                          0.1.28-1                      0.67 MiB               
[2019-11-04T16:39:15.032Z] world/libtiff                          4.0.10-1                      2.73 MiB               
[2019-11-04T16:39:15.032Z] world/libunwind                        1.3.1-1                       0.29 MiB               
[2019-11-04T16:39:15.032Z] system/libusb                          1.0.23-1                      0.20 MiB               
[2019-11-04T16:39:15.032Z] world/libvorbis                        1.3.6-1                       1.49 MiB               
[2019-11-04T16:39:15.032Z] world/libx11                           1.6.9-3                      10.53 MiB               
[2019-11-04T16:39:15.032Z] world/libxau                           1.0.9-1                       0.06 MiB               
[2019-11-04T16:39:15.032Z] world/libxcb                           1.13.1-1                      4.00 MiB               
[2019-11-04T16:39:15.032Z] world/libxcomposite                    0.4.5-1                       0.07 MiB               
[2019-11-04T16:39:15.032Z] world/libxcursor                       1.2.0-1                       0.12 MiB               
[2019-11-04T16:39:15.032Z] world/libxdamage                       1.1.5-1                       0.06 MiB               
[2019-11-04T16:39:15.032Z] world/libxdmcp                         1.1.3-1                       0.17 MiB               
[2019-11-04T16:39:15.032Z] world/libxext                          1.3.4-1                       0.36 MiB               
[2019-11-04T16:39:15.032Z] world/libxfixes                        5.0.3-2                       0.08 MiB               
[2019-11-04T16:39:15.032Z] world/libxft                           2.3.3-1                       0.16 MiB               
[2019-11-04T16:39:15.032Z] world/libxi                            1.7.10-1                      0.53 MiB               
[2019-11-04T16:39:15.032Z] world/libxinerama                      1.1.4-1                       0.07 MiB               
[2019-11-04T16:39:15.032Z] world/libxkbcommon                     0.9.1-1                       0.58 MiB               
[2019-11-04T16:39:15.032Z] world/libxrandr                        1.5.2-1                       0.12 MiB               
[2019-11-04T16:39:15.032Z] world/libxrender                       0.9.10-2                      0.12 MiB               
[2019-11-04T16:39:15.032Z] world/libxshmfence                     1.3-1                         0.04 MiB               
[2019-11-04T16:39:15.032Z] world/libxtst                          1.2.3-2                       0.17 MiB               
[2019-11-04T16:39:15.032Z] world/libxxf86vm                       1.1.4-2                       0.08 MiB               
[2019-11-04T16:39:15.032Z] goblins/llvm-libs                      9.0.0-4                      78.21 MiB               
[2019-11-04T16:39:15.032Z] world/lm_sensors                       3.6.0-1                       0.52 MiB               
[2019-11-04T16:39:15.032Z] system/lzo                             2.10-2                        0.42 MiB               
[2019-11-04T16:39:15.032Z] world/mesa                             19.2.2-1                    282.89 MiB               
[2019-11-04T16:39:15.032Z] world/pango                            1:1.44.7-1                    4.36 MiB               
[2019-11-04T16:39:15.032Z] world/pixman                           0.38.4-1                      0.74 MiB               
[2019-11-04T16:39:15.032Z] world/polkit                           0.116-3                       2.08 MiB               
[2019-11-04T16:39:15.032Z] goblins/pygobject-devel                3.34.0-3                      0.02 MiB               
[2019-11-04T16:39:15.032Z] goblins/python                         3.8.0-1                     151.60 MiB               
[2019-11-04T16:39:15.032Z] goblins/python-appdirs                 1.4.3-5                       0.07 MiB               
[2019-11-04T16:39:15.032Z] goblins/python-chardet                 3.0.4-4                       1.12 MiB               
[2019-11-04T16:39:15.032Z] goblins/python-dbus-common             1.2.8-4                       8.16 MiB               
[2019-11-04T16:39:15.032Z] goblins/python-idna                    2.8-3                         0.66 MiB               
[2019-11-04T16:39:15.032Z] goblins/python-packaging               19.2-5                        0.14 MiB               
[2019-11-04T16:39:15.032Z] goblins/python-pyparsing               2.4.2-4                       0.70 MiB               
[2019-11-04T16:39:15.032Z] goblins/python-setuptools              1:41.2.0-5                    1.54 MiB               
[2019-11-04T16:39:15.032Z] goblins/python-six                     1.12.0-4                      0.08 MiB               
[2019-11-04T16:39:15.032Z] goblins/python-urllib3                 1.25.6-4                      0.64 MiB               
[2019-11-04T16:39:15.032Z] world/rest                             0.8.1-1                       0.81 MiB               
[2019-11-04T16:39:15.032Z] world/shared-mime-info                 1.15-1                        4.25 MiB               
[2019-11-04T16:39:15.032Z] world/sound-theme-freedesktop          0.8-3                         0.48 MiB               
[2019-11-04T16:39:15.032Z] goblins/tdb                            1.3.18-4                      0.23 MiB               
[2019-11-04T16:39:15.032Z] world/wayland                          1.17.0-1                      0.76 MiB               
[2019-11-04T16:39:15.032Z] world/wayland-protocols                1.18-1                        0.51 MiB               
[2019-11-04T16:39:15.032Z] goblins/xcb-proto                      1.13-4                        0.82 MiB               
[2019-11-04T16:39:15.032Z] world/xkeyboard-config                 2.28-1                        5.38 MiB               
[2019-11-04T16:39:15.032Z] world/xorgproto                        2019.2-1                      1.61 MiB               
[2019-11-04T16:39:15.032Z] world/gtk3                             1:3.24.12+32+g39e28ab933-1   73.34 MiB               
[2019-11-04T16:39:15.032Z] world/libnotify                        0.7.8-1                       0.33 MiB               
[2019-11-04T16:39:15.032Z] goblins/python-cairo                   1.18.2-3                      0.25 MiB               
[2019-11-04T16:39:15.032Z] goblins/python-dbus                    1.2.8-4                       0.53 MiB               
[2019-11-04T16:39:15.033Z] goblins/python-gobject                 3.34.0-3                      1.09 MiB               
[2019-11-04T16:39:15.033Z] goblins/python-pycups                  1.9.74-3                      0.19 MiB       0.05 MiB
[2019-11-04T16:39:15.033Z] goblins/python-pycurl                  7.43.0.3-3                    0.32 MiB               
[2019-11-04T16:39:15.033Z] goblins/python-requests                2.22.0-3                      0.44 MiB               
[2019-11-04T16:39:15.033Z] 
[2019-11-04T16:39:15.033Z] Total Download Size:     0.05 MiB
[2019-11-04T16:39:15.033Z] Total Installed Size:  843.47 MiB
[2019-11-04T16:39:15.033Z] 
[2019-11-04T16:39:15.033Z] :: Proceed with installation? [Y/n] 
[2019-11-04T16:39:15.033Z] :: Retrieving packages...
[2019-11-04T16:39:15.033Z] downloading python-pycups-1.9.74-3-x86_64.pkg.tar.xz...
[2019-11-04T16:39:15.033Z] checking keyring...
[2019-11-04T16:39:15.283Z] checking package integrity...
[2019-11-04T16:39:20.477Z] loading package files...
[2019-11-04T16:39:20.728Z] checking for file conflicts...
[2019-11-04T16:39:20.728Z] checking available disk space...
[2019-11-04T16:39:20.728Z] :: Processing package changes...
[2019-11-04T16:39:20.728Z] installing libjpeg-turbo...
[2019-11-04T16:39:20.728Z] installing libtiff...
[2019-11-04T16:39:20.978Z] Optional dependencies for libtiff
[2019-11-04T16:39:20.978Z]     freeglut: for using tiffgt
[2019-11-04T16:39:20.978Z] installing libpng...
[2019-11-04T16:39:20.978Z] installing libdaemon...
[2019-11-04T16:39:20.978Z] installing xcb-proto...
[2019-11-04T16:39:20.978Z] installing xorgproto...
[2019-11-04T16:39:20.978Z] installing libxdmcp...
[2019-11-04T16:39:20.978Z] installing libxau...
[2019-11-04T16:39:20.978Z] installing libxcb...
[2019-11-04T16:39:21.228Z] installing libx11...
[2019-11-04T16:39:21.228Z] installing dbus...
[2019-11-04T16:39:21.479Z] installing avahi...
[2019-11-04T16:39:21.479Z] Optional dependencies for avahi
[2019-11-04T16:39:21.479Z]     gtk3: avahi-discover, avahi-discover-standalone, bshell, bssh, bvnc [pending]
[2019-11-04T16:39:21.479Z]     gtk2: gtk2 bindings
[2019-11-04T16:39:21.479Z]     qt5-base: qt5 bindings
[2019-11-04T16:39:21.479Z]     pygtk: avahi-bookmarks
[2019-11-04T16:39:21.479Z]     python2-twisted: avahi-bookmarks
[2019-11-04T16:39:21.479Z]     mono: mono bindings
[2019-11-04T16:39:21.479Z]     nss-mdns: NSS support for mDNS
[2019-11-04T16:39:21.479Z]     python-gobject: avahi-discover [pending]
[2019-11-04T16:39:21.479Z]     python-dbus: avahi-discover [pending]
[2019-11-04T16:39:21.479Z] installing libusb...
[2019-11-04T16:39:21.479Z] installing libcups...
[2019-11-04T16:39:21.479Z] installing libnsl...
[2019-11-04T16:39:21.479Z] installing python...
[2019-11-04T16:39:25.601Z] Optional dependencies for python
[2019-11-04T16:39:25.601Z]     python-setuptools [pending]
[2019-11-04T16:39:25.601Z]     python-pip
[2019-11-04T16:39:25.601Z]     sqlite [installed]
[2019-11-04T16:39:25.601Z]     mpdecimal: for decimal
[2019-11-04T16:39:25.601Z]     xz: for lzma [installed]
[2019-11-04T16:39:25.601Z]     tk: for tkinter
[2019-11-04T16:39:25.601Z] installing python-pycups...
[2019-11-04T16:39:25.601Z] installing python-dbus-common...
[2019-11-04T16:39:25.601Z] installing python-dbus...
[2019-11-04T16:39:25.601Z] installing python-pycurl...
[2019-11-04T16:39:25.601Z] installing jasper...
[2019-11-04T16:39:25.601Z] Optional dependencies for jasper
[2019-11-04T16:39:25.601Z]     jasper-doc: documentation
[2019-11-04T16:39:25.601Z]     freeglut: jiv support
[2019-11-04T16:39:25.601Z]     glu: jiv support
[2019-11-04T16:39:25.601Z] installing shared-mime-info...
[2019-11-04T16:39:25.601Z] installing gdk-pixbuf2...
[2019-11-04T16:39:25.601Z] installing libnotify...
[2019-11-04T16:39:25.601Z] installing python-urllib3...
[2019-11-04T16:39:25.601Z] Optional dependencies for python-urllib3
[2019-11-04T16:39:25.601Z]     python-pysocks: SOCKS support
[2019-11-04T16:39:25.601Z]     python-brotlipy: Brotli support
[2019-11-04T16:39:25.601Z]     python-pyopenssl: security support
[2019-11-04T16:39:25.601Z] installing python-appdirs...
[2019-11-04T16:39:25.601Z] installing python-pyparsing...
[2019-11-04T16:39:25.601Z] installing python-six...
[2019-11-04T16:39:25.601Z] installing python-packaging...
[2019-11-04T16:39:25.601Z] installing python-setuptools...
[2019-11-04T16:39:25.601Z] installing python-chardet...
[2019-11-04T16:39:25.601Z] installing python-idna...
[2019-11-04T16:39:25.601Z] installing python-requests...
[2019-11-04T16:39:25.601Z] Optional dependencies for python-requests
[2019-11-04T16:39:25.601Z]     python-pysocks: SOCKS proxy support
[2019-11-04T16:39:25.601Z] installing gobject-introspection-runtime...
[2019-11-04T16:39:25.601Z] installing pygobject-devel...
[2019-11-04T16:39:25.601Z] installing python-gobject...
[2019-11-04T16:39:25.601Z] Optional dependencies for python-gobject
[2019-11-04T16:39:25.601Z]     cairo: Cairo bindings [pending]
[2019-11-04T16:39:25.601Z] installing atk...
[2019-11-04T16:39:25.601Z] installing libxrender...
[2019-11-04T16:39:25.601Z] installing libxext...
[2019-11-04T16:39:25.601Z] installing graphite...
[2019-11-04T16:39:25.601Z] installing harfbuzz...
[2019-11-04T16:39:25.601Z] Optional dependencies for harfbuzz
[2019-11-04T16:39:25.601Z]     cairo: hb-view program [pending]
[2019-11-04T16:39:25.601Z] installing freetype2...
[2019-11-04T16:39:25.851Z] installing fontconfig...
[2019-11-04T16:39:25.851Z]   
[2019-11-04T16:39:25.851Z]   Fontconfig configuration is done via /etc/fonts/conf.avail and conf.d.
[2019-11-04T16:39:25.851Z]   Read /etc/fonts/conf.d/README for more information.
[2019-11-04T16:39:25.851Z] 
[2019-11-04T16:39:25.851Z]   Configuration via /etc/fonts/local.conf is still possible,
[2019-11-04T16:39:25.851Z]   but is no longer recommended for options available in conf.avail.
[2019-11-04T16:39:25.851Z] 
[2019-11-04T16:39:25.851Z]   Main systemwide configuration should be done by symlinks
[2019-11-04T16:39:25.851Z]   (especially for autohinting, sub-pixel and lcdfilter):
[2019-11-04T16:39:25.851Z]   
[2019-11-04T16:39:25.851Z]   cd /etc/fonts/conf.d
[2019-11-04T16:39:25.851Z]   ln -s ../conf.avail/XX-foo.conf
[2019-11-04T16:39:25.851Z]   
[2019-11-04T16:39:25.851Z]   Check also https://wiki.archlinux.org/index.php/Font_Configuration
[2019-11-04T16:39:25.851Z]   and https://wiki.archlinux.org/index.php/Fonts.
[2019-11-04T16:39:25.851Z] 
[2019-11-04T16:39:25.851Z] Rebuilding fontconfig cache... done.
[2019-11-04T16:39:25.851Z] installing pixman...
[2019-11-04T16:39:25.851Z] installing lzo...
[2019-11-04T16:39:25.851Z] installing cairo...
[2019-11-04T16:39:26.102Z] installing libxfixes...
[2019-11-04T16:39:26.102Z] installing libxcursor...
[2019-11-04T16:39:26.102Z] Optional dependencies for libxcursor
[2019-11-04T16:39:26.102Z]     gnome-themes-standard: fallback icon theme
[2019-11-04T16:39:26.102Z] installing libxinerama...
[2019-11-04T16:39:26.102Z] installing libxrandr...
[2019-11-04T16:39:26.102Z] installing libxi...
[2019-11-04T16:39:26.102Z] installing libepoxy...
[2019-11-04T16:39:26.102Z] installing dconf...
[2019-11-04T16:39:26.102Z] installing libxcomposite...
[2019-11-04T16:39:26.102Z] installing libxdamage...
[2019-11-04T16:39:26.102Z] installing libdatrie...
[2019-11-04T16:39:26.102Z] installing libthai...
[2019-11-04T16:39:26.102Z] installing libxft...
[2019-11-04T16:39:26.102Z] installing fribidi...
[2019-11-04T16:39:26.102Z] installing pango...
[2019-11-04T16:39:26.102Z] installing libxtst...
[2019-11-04T16:39:26.102Z] installing at-spi2-core...
[2019-11-04T16:39:26.102Z] installing at-spi2-atk...
[2019-11-04T16:39:26.102Z] installing wayland...
[2019-11-04T16:39:26.352Z] installing xkeyboard-config...
[2019-11-04T16:39:26.352Z] installing libxkbcommon...
[2019-11-04T16:39:26.352Z] installing hicolor-icon-theme...
[2019-11-04T16:39:26.352Z] installing librsvg...
[2019-11-04T16:39:26.352Z] installing gtk-update-icon-cache...
[2019-11-04T16:39:26.352Z] installing adwaita-icon-theme...
[2019-11-04T16:39:27.695Z] installing json-glib...
[2019-11-04T16:39:27.695Z] installing wayland-protocols...
[2019-11-04T16:39:27.695Z] installing desktop-file-utils...
[2019-11-04T16:39:27.695Z] installing libpciaccess...
[2019-11-04T16:39:27.695Z] installing libdrm...
[2019-11-04T16:39:27.695Z] installing libxxf86vm...
[2019-11-04T16:39:27.695Z] installing libxshmfence...
[2019-11-04T16:39:27.695Z] installing libomxil-bellagio...
[2019-11-04T16:39:27.695Z] installing libunwind...
[2019-11-04T16:39:27.695Z] installing libedit...
[2019-11-04T16:39:27.695Z] installing llvm-libs...
[2019-11-04T16:39:29.556Z] installing lm_sensors...
[2019-11-04T16:39:29.556Z] Optional dependencies for lm_sensors
[2019-11-04T16:39:29.556Z]     rrdtool: for logging with sensord
[2019-11-04T16:39:29.556Z] installing libglvnd...
[2019-11-04T16:39:29.807Z] installing mesa...
[2019-11-04T16:39:31.668Z] Optional dependencies for mesa
[2019-11-04T16:39:31.668Z]     opengl-man-pages: for the OpenGL API man pages
[2019-11-04T16:39:31.668Z]     mesa-vdpau: for accelerated video playback
[2019-11-04T16:39:31.668Z]     libva-mesa-driver: for accelerated video playback
[2019-11-04T16:39:31.668Z] installing cantarell-fonts...
[2019-11-04T16:39:31.668Z] installing lcms2...
[2019-11-04T16:39:31.668Z] installing libgusb...
[2019-11-04T16:39:31.668Z] installing libseccomp...
[2019-11-04T16:39:31.668Z] installing kexec-tools...
[2019-11-04T16:39:31.668Z] installing kbd...
[2019-11-04T16:39:31.918Z] installing kmod...
[2019-11-04T16:39:31.918Z] installing hwids...
[2019-11-04T16:39:31.918Z] installing eudev...
[2019-11-04T16:39:31.918Z] Optional dependencies for eudev
[2019-11-04T16:39:31.918Z]     eudev-openrc: udev starup scripts for openrc
[2019-11-04T16:39:31.918Z] installing elogind...
[2019-11-04T16:39:32.168Z] Optional dependencies for elogind
[2019-11-04T16:39:32.168Z]     polkit: polkit support [pending]
[2019-11-04T16:39:32.168Z] installing js60...
[2019-11-04T16:39:33.511Z] installing polkit...
[2019-11-04T16:39:33.511Z] installing libgudev...
[2019-11-04T16:39:33.511Z] installing colord...
[2019-11-04T16:39:33.511Z] Optional dependencies for colord
[2019-11-04T16:39:33.511Z]     argyllcms: color profiling
[2019-11-04T16:39:33.511Z]     colord-sane: SANE support
[2019-11-04T16:39:33.511Z] installing libproxy...
[2019-11-04T16:39:33.511Z] Optional dependencies for libproxy
[2019-11-04T16:39:33.511Z]     networkmanager: NetworkManager configuration module
[2019-11-04T16:39:33.511Z]     perl: Perl bindings [installed]
[2019-11-04T16:39:33.511Z]     python2: Python 2.x bindings
[2019-11-04T16:39:33.511Z]     python: Python 3.x bindings [installed]
[2019-11-04T16:39:33.511Z]     glib2: gsettings configuration module [installed]
[2019-11-04T16:39:33.511Z]     webkit2gtk: PAC proxy support (Webkit2gtk engine)
[2019-11-04T16:39:33.511Z] installing adobe-source-code-pro-fonts...
[2019-11-04T16:39:33.762Z] installing gsettings-desktop-schemas...
[2019-11-04T16:39:33.762Z] installing glib-networking...
[2019-11-04T16:39:33.762Z] Optional dependencies for glib-networking
[2019-11-04T16:39:33.762Z]     openssl: Alternative backend [installed]
[2019-11-04T16:39:33.762Z] installing brotli...
[2019-11-04T16:39:33.762Z] installing libsoup...
[2019-11-04T16:39:34.012Z] Optional dependencies for libsoup
[2019-11-04T16:39:34.012Z]     samba: Windows Domain SSO
[2019-11-04T16:39:34.012Z] installing rest...
[2019-11-04T16:39:34.012Z] installing libogg...
[2019-11-04T16:39:34.012Z] installing libvorbis...
[2019-11-04T16:39:34.012Z] installing alsa-lib...
[2019-11-04T16:39:34.012Z] installing tdb...
[2019-11-04T16:39:34.012Z] Optional dependencies for tdb
[2019-11-04T16:39:34.012Z]     python: for python bindings [installed]
[2019-11-04T16:39:34.012Z] installing sound-theme-freedesktop...
[2019-11-04T16:39:34.012Z] installing libcanberra...
[2019-11-04T16:39:34.012Z] Optional dependencies for libcanberra
[2019-11-04T16:39:34.012Z]     libcanberra-pulse: PulseAudio driver
[2019-11-04T16:39:34.012Z]     libcanberra-gstreamer: GStreamer driver
[2019-11-04T16:39:34.012Z] installing iso-codes...
[2019-11-04T16:39:34.563Z] installing gtk3...
[2019-11-04T16:39:35.905Z] installing python-cairo...
[2019-11-04T16:39:35.905Z] :: Running post-transaction hooks...
[2019-11-04T16:39:35.905Z] ( 1/12) Creating system user accounts...
[2019-11-04T16:39:36.156Z] ( 2/12) Updating udev Hardware Database...
[2019-11-04T16:39:36.156Z] ( 3/12) Reloading device manager configuration...
[2019-11-04T16:39:36.156Z]   Skipped: Device manager is not running.
[2019-11-04T16:39:36.156Z] ( 4/12) Warn about old perl modules
[2019-11-04T16:39:36.406Z] ( 5/12) Updating fontconfig cache...
[2019-11-04T16:39:36.406Z] ( 6/12) Probing GDK-Pixbuf loader modules...
[2019-11-04T16:39:36.406Z] ( 7/12) Updating GIO module cache...
[2019-11-04T16:39:36.406Z] ( 8/12) Compiling GSettings XML schema files...
[2019-11-04T16:39:36.406Z] ( 9/12) Probing GTK3 input method modules...
[2019-11-04T16:39:36.406Z] (10/12) Updating icon theme caches...
[2019-11-04T16:39:36.406Z] (11/12) Updating the desktop file MIME type cache...
[2019-11-04T16:39:36.406Z] (12/12) Updating the MIME type database...
[2019-11-04T16:39:36.957Z] ==> Checking buildtime dependencies...
[2019-11-04T16:39:36.957Z] ==> Installing missing dependencies...
[2019-11-04T16:39:37.207Z] resolving dependencies...
[2019-11-04T16:39:37.207Z] looking for conflicting packages...
[2019-11-04T16:39:37.207Z] 
[2019-11-04T16:39:37.207Z] Package (6)            New Version  Net Change
[2019-11-04T16:39:37.207Z] 
[2019-11-04T16:39:37.207Z] world/docbook-xml      4.5-8          2.04 MiB
[2019-11-04T16:39:37.207Z] world/libxslt          1.1.33-1       2.40 MiB
[2019-11-04T16:39:37.207Z] world/perl-xml-parser  2.44-9         0.51 MiB
[2019-11-04T16:39:37.207Z] world/docbook-xsl      1.79.2-5      26.59 MiB
[2019-11-04T16:39:37.207Z] world/intltool         0.51.0-4       0.19 MiB
[2019-11-04T16:39:37.207Z] world/xmlto            0.0.28-3       0.12 MiB
[2019-11-04T16:39:37.207Z] 
[2019-11-04T16:39:37.207Z] Total Installed Size:  31.84 MiB
[2019-11-04T16:39:37.207Z] 
[2019-11-04T16:39:37.207Z] :: Proceed with installation? [Y/n] 
[2019-11-04T16:39:37.207Z] checking keyring...
[2019-11-04T16:39:37.207Z] checking package integrity...
[2019-11-04T16:39:37.207Z] loading package files...
[2019-11-04T16:39:37.458Z] checking for file conflicts...
[2019-11-04T16:39:37.458Z] checking available disk space...
[2019-11-04T16:39:37.458Z] :: Processing package changes...
[2019-11-04T16:39:37.458Z] installing perl-xml-parser...
[2019-11-04T16:39:37.458Z] installing intltool...
[2019-11-04T16:39:37.458Z] installing libxslt...
[2019-11-04T16:39:37.458Z] installing xmlto...
[2019-11-04T16:39:37.458Z] installing docbook-xml...
[2019-11-04T16:39:37.458Z] installing docbook-xsl...
[2019-11-04T16:39:38.008Z] :: Running post-transaction hooks...
[2019-11-04T16:39:38.008Z] (1/1) Warn about old perl modules
[2019-11-04T16:39:38.008Z] ==> Retrieving sources...
[2019-11-04T16:39:38.008Z]   -> Found system-config-printer-1.5.12.tar.xz
[2019-11-04T16:39:38.008Z] ==> WARNING: Skipping all source file integrity checks.
[2019-11-04T16:39:38.008Z] ==> Extracting sources...
[2019-11-04T16:39:38.008Z]   -> Extracting system-config-printer-1.5.12.tar.xz with bsdtar
[2019-11-04T16:39:38.008Z] ==> Starting build()...
[2019-11-04T16:39:38.259Z] checking for a BSD-compatible install... /usr/bin/install -c
[2019-11-04T16:39:38.259Z] checking whether build environment is sane... yes
[2019-11-04T16:39:38.259Z] checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
[2019-11-04T16:39:38.259Z] checking for gawk... gawk
[2019-11-04T16:39:38.259Z] checking whether make sets $(MAKE)... yes
[2019-11-04T16:39:38.259Z] checking whether make supports nested variables... yes
[2019-11-04T16:39:38.259Z] checking whether NLS is requested... yes
[2019-11-04T16:39:38.259Z] checking for intltool-update... /usr/bin/intltool-update
[2019-11-04T16:39:38.259Z] checking for intltool-merge... /usr/bin/intltool-merge
[2019-11-04T16:39:38.259Z] checking for intltool-extract... /usr/bin/intltool-extract
[2019-11-04T16:39:38.259Z] checking for xgettext... /usr/bin/xgettext
[2019-11-04T16:39:38.259Z] checking for msgmerge... /usr/bin/msgmerge
[2019-11-04T16:39:38.259Z] checking for msgfmt... /usr/bin/msgfmt
[2019-11-04T16:39:38.259Z] checking for gmsgfmt... /usr/bin/msgfmt
[2019-11-04T16:39:38.259Z] checking for perl... /usr/bin/perl
[2019-11-04T16:39:38.259Z] checking for perl >= 5.8.1... 5.30.0
[2019-11-04T16:39:38.509Z] checking for XML::Parser... ok
[2019-11-04T16:39:38.509Z] checking for a sed that does not truncate output... /usr/bin/sed
[2019-11-04T16:39:38.509Z] checking for msgfmt... (cached) /usr/bin/msgfmt
[2019-11-04T16:39:38.509Z] checking for gmsgfmt... (cached) /usr/bin/msgfmt
[2019-11-04T16:39:38.509Z] checking for xgettext... (cached) /usr/bin/xgettext
[2019-11-04T16:39:38.509Z] checking for msgmerge... (cached) /usr/bin/msgmerge
[2019-11-04T16:39:38.509Z] checking whether make supports the include directive... yes (GNU style)
[2019-11-04T16:39:38.509Z] checking for gcc... gcc
[2019-11-04T16:39:38.509Z] checking whether the C compiler works... yes
[2019-11-04T16:39:38.509Z] checking for C compiler default output file name... a.out
[2019-11-04T16:39:38.509Z] checking for suffix of executables... 
[2019-11-04T16:39:38.760Z] checking whether we are cross compiling... no
[2019-11-04T16:39:38.760Z] checking for suffix of object files... o
[2019-11-04T16:39:38.760Z] checking whether we are using the GNU C compiler... yes
[2019-11-04T16:39:38.760Z] checking whether gcc accepts -g... yes
[2019-11-04T16:39:38.760Z] checking for gcc option to accept ISO C89... none needed
[2019-11-04T16:39:38.760Z] checking whether gcc understands -c and -o together... yes
[2019-11-04T16:39:38.760Z] checking dependency style of gcc... gcc3
[2019-11-04T16:39:39.010Z] checking build system type... x86_64-unknown-linux-gnu
[2019-11-04T16:39:39.010Z] checking host system type... x86_64-unknown-linux-gnu
[2019-11-04T16:39:39.010Z] checking for ld used by gcc... /usr/bin/ld
[2019-11-04T16:39:39.010Z] checking if the linker (/usr/bin/ld) is GNU ld... yes
[2019-11-04T16:39:39.010Z] checking for shared library run path origin... done
[2019-11-04T16:39:39.010Z] checking how to run the C preprocessor... gcc -E
[2019-11-04T16:39:39.010Z] checking for grep that handles long lines and -e... /usr/bin/grep
[2019-11-04T16:39:39.010Z] checking for egrep... /usr/bin/grep -E
[2019-11-04T16:39:39.260Z] checking for CFPreferencesCopyAppValue... no
[2019-11-04T16:39:39.260Z] checking for CFLocaleCopyCurrent... no
[2019-11-04T16:39:39.260Z] checking for GNU gettext in libc... yes
[2019-11-04T16:39:39.260Z] checking whether to use NLS... yes
[2019-11-04T16:39:39.260Z] checking where the gettext function comes from... libc
[2019-11-04T16:39:39.260Z] checking for a Python interpreter with version >= 3... python
[2019-11-04T16:39:39.260Z] checking for python... /usr/bin/python
[2019-11-04T16:39:39.260Z] checking for python version... 3.8
[2019-11-04T16:39:39.260Z] checking for python platform... linux
[2019-11-04T16:39:39.260Z] checking for python script directory... ${prefix}/lib/python3.8/site-packages
[2019-11-04T16:39:39.511Z] checking for python extension module directory... ${exec_prefix}/lib/python3.8/site-packages
[2019-11-04T16:39:39.511Z] checking for pkg-config... /usr/bin/pkg-config
[2019-11-04T16:39:39.511Z] checking pkg-config is at least version 0.9.0... yes
[2019-11-04T16:39:39.511Z] checking for GLIB... yes
[2019-11-04T16:39:39.511Z] checking for libudev... yes
[2019-11-04T16:39:39.511Z] checking for libusb... yes
[2019-11-04T16:39:39.511Z] checking for pkg-config... (cached) /usr/bin/pkg-config
[2019-11-04T16:39:39.511Z] checking pkg-config is at least version 0.9.0... yes
[2019-11-04T16:39:39.511Z] checking that generated files are newer than configure... done
[2019-11-04T16:39:39.511Z] configure: creating ./config.status
[2019-11-04T16:39:39.511Z] config.status: creating Makefile
[2019-11-04T16:39:39.511Z] config.status: creating po/Makefile.in
[2019-11-04T16:39:39.511Z] config.status: creating system-config-printer
[2019-11-04T16:39:39.761Z] config.status: creating system-config-printer-applet
[2019-11-04T16:39:39.761Z] config.status: creating install-printerdriver
[2019-11-04T16:39:39.761Z] config.status: creating dbus/scp-dbus-service
[2019-11-04T16:39:39.761Z] config.status: creating udev/configure-printer at .service
[2019-11-04T16:39:39.761Z] config.status: executing po-directories commands
[2019-11-04T16:39:39.761Z] config.status: creating po/POTFILES
[2019-11-04T16:39:39.761Z] config.status: creating po/Makefile
[2019-11-04T16:39:39.761Z] config.status: executing depfiles commands
[2019-11-04T16:39:39.761Z] config.status: executing po/stamp-it commands
[2019-11-04T16:39:40.011Z] Making all in po
[2019-11-04T16:39:40.011Z] make[1]: Entering directory '/build/system-config-printer/src/system-config-printer-1.5.12/po'
[2019-11-04T16:39:40.011Z] file=`echo ar | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.011Z]   && rm -f $file && /usr/bin/msgfmt -o $file ar.po
[2019-11-04T16:39:40.011Z] file=`echo as | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.011Z]   && rm -f $file && /usr/bin/msgfmt -o $file as.po
[2019-11-04T16:39:40.011Z] file=`echo bg | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.011Z]   && rm -f $file && /usr/bin/msgfmt -o $file bg.po
[2019-11-04T16:39:40.011Z] file=`echo bn_IN | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.011Z]   && rm -f $file && /usr/bin/msgfmt -o $file bn_IN.po
[2019-11-04T16:39:40.011Z] file=`echo bn | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.011Z]   && rm -f $file && /usr/bin/msgfmt -o $file bn.po
[2019-11-04T16:39:40.011Z] file=`echo br | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.011Z]   && rm -f $file && /usr/bin/msgfmt -o $file br.po
[2019-11-04T16:39:40.011Z] file=`echo bs | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file bs.po
[2019-11-04T16:39:40.012Z] file=`echo ca | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file ca.po
[2019-11-04T16:39:40.012Z] file=`echo cs | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file cs.po
[2019-11-04T16:39:40.012Z] file=`echo cy | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file cy.po
[2019-11-04T16:39:40.012Z] file=`echo da | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file da.po
[2019-11-04T16:39:40.012Z] file=`echo de | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file de.po
[2019-11-04T16:39:40.012Z] file=`echo el | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file el.po
[2019-11-04T16:39:40.012Z] file=`echo en_GB | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file en_GB.po
[2019-11-04T16:39:40.012Z] file=`echo es | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file es.po
[2019-11-04T16:39:40.012Z] file=`echo et | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file et.po
[2019-11-04T16:39:40.012Z] file=`echo fa | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file fa.po
[2019-11-04T16:39:40.012Z] file=`echo fi | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file fi.po
[2019-11-04T16:39:40.012Z] file=`echo fr | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file fr.po
[2019-11-04T16:39:40.012Z] file=`echo gu | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file gu.po
[2019-11-04T16:39:40.012Z] file=`echo he | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file he.po
[2019-11-04T16:39:40.012Z] file=`echo hi | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file hi.po
[2019-11-04T16:39:40.012Z] file=`echo hr | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file hr.po
[2019-11-04T16:39:40.012Z] file=`echo hu | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file hu.po
[2019-11-04T16:39:40.012Z] file=`echo id | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file id.po
[2019-11-04T16:39:40.012Z] file=`echo is | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file is.po
[2019-11-04T16:39:40.012Z] file=`echo it | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file it.po
[2019-11-04T16:39:40.012Z] file=`echo ja | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file ja.po
[2019-11-04T16:39:40.012Z] file=`echo kn | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file kn.po
[2019-11-04T16:39:40.012Z] file=`echo ko | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file ko.po
[2019-11-04T16:39:40.012Z] file=`echo lt | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file lt.po
[2019-11-04T16:39:40.012Z] file=`echo lv | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file lv.po
[2019-11-04T16:39:40.012Z] file=`echo mai | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file mai.po
[2019-11-04T16:39:40.012Z] file=`echo ml | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file ml.po
[2019-11-04T16:39:40.012Z] file=`echo mr | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file mr.po
[2019-11-04T16:39:40.012Z] file=`echo ms | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file ms.po
[2019-11-04T16:39:40.012Z] file=`echo nb | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file nb.po
[2019-11-04T16:39:40.012Z] file=`echo nds | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file nds.po
[2019-11-04T16:39:40.012Z] file=`echo nl | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file nl.po
[2019-11-04T16:39:40.012Z] file=`echo nn | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file nn.po
[2019-11-04T16:39:40.012Z] file=`echo or | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file or.po
[2019-11-04T16:39:40.012Z] file=`echo pa | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file pa.po
[2019-11-04T16:39:40.012Z] file=`echo pl | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file pl.po
[2019-11-04T16:39:40.012Z] file=`echo pt_BR | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file pt_BR.po
[2019-11-04T16:39:40.012Z] file=`echo pt | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file pt.po
[2019-11-04T16:39:40.012Z] file=`echo ro | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file ro.po
[2019-11-04T16:39:40.012Z] file=`echo ru | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file ru.po
[2019-11-04T16:39:40.012Z] file=`echo si | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file si.po
[2019-11-04T16:39:40.012Z] file=`echo sk | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file sk.po
[2019-11-04T16:39:40.012Z] file=`echo sl | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file sl.po
[2019-11-04T16:39:40.012Z] file=`echo sr at latin | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file sr at latin.po
[2019-11-04T16:39:40.012Z] file=`echo sr | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file sr.po
[2019-11-04T16:39:40.012Z] file=`echo sv | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file sv.po
[2019-11-04T16:39:40.012Z] file=`echo ta | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file ta.po
[2019-11-04T16:39:40.012Z] file=`echo te | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file te.po
[2019-11-04T16:39:40.012Z] file=`echo th | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file th.po
[2019-11-04T16:39:40.012Z] file=`echo tr | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file tr.po
[2019-11-04T16:39:40.012Z] file=`echo uk | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file uk.po
[2019-11-04T16:39:40.012Z] file=`echo vi | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file vi.po
[2019-11-04T16:39:40.012Z] file=`echo zh_CN | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file zh_CN.po
[2019-11-04T16:39:40.012Z] file=`echo zh_TW | sed 's,.*/,,'`.gmo \
[2019-11-04T16:39:40.012Z]   && rm -f $file && /usr/bin/msgfmt -o $file zh_TW.po
[2019-11-04T16:39:40.012Z] make[1]: Leaving directory '/build/system-config-printer/src/system-config-printer-1.5.12/po'
[2019-11-04T16:39:40.012Z] make[1]: Entering directory '/build/system-config-printer/src/system-config-printer-1.5.12'
[2019-11-04T16:39:40.012Z] xmlto man -o man man/system-config-printer.xml
[2019-11-04T16:39:40.012Z] LC_ALL=C /usr/bin/intltool-merge  -x -u -c ./po/.intltool-merge-cache ./po system-config-printer.appdata.xml.in system-config-printer.appdata.xml
[2019-11-04T16:39:40.012Z] LC_ALL=C /usr/bin/intltool-merge  -d -u -c ./po/.intltool-merge-cache ./po system-config-printer.desktop.in system-config-printer.desktop
[2019-11-04T16:39:40.012Z] LC_ALL=C /usr/bin/intltool-merge  -d -u -c ./po/.intltool-merge-cache ./po print-applet.desktop.in print-applet.desktop
[2019-11-04T16:39:40.012Z] sed \
[2019-11-04T16:39:40.012Z]   -e "s|\@prefix\@|/usr|" \
[2019-11-04T16:39:40.012Z]   -e "s|\@datadir\@|/usr/share|" \
[2019-11-04T16:39:40.012Z]   -e "s|\@localedir\@|/usr/share/locale|" \
[2019-11-04T16:39:40.012Z]   -e "s|\@VERSION\@|1.5.12|" \
[2019-11-04T16:39:40.012Z]   -e "s|\@PACKAGE\@|system-config-printer|" \
[2019-11-04T16:39:40.012Z]   config.py.in > config.py
[2019-11-04T16:39:40.012Z] sed \
[2019-11-04T16:39:40.012Z] -e "s|\@bindir\@|/usr/bin|" \
[2019-11-04T16:39:40.012Z] dbus/org.fedoraproject.Config.Printing.service.in >dbus/org.fedoraproject.Config.Printing.service
[2019-11-04T16:39:40.012Z] if [ "." != "." ]; then	\
[2019-11-04T16:39:40.012Z] 	cp ./setup.py .;			\
[2019-11-04T16:39:40.012Z] 	/usr/bin/mkdir -p cupshelpers;				\
[2019-11-04T16:39:40.012Z] 	for file in cupshelpers/__init__.py cupshelpers/cupshelpers.py cupshelpers/installdriver.py cupshelpers/ppds.py cupshelpers/openprinting.py cupshelpers/xmldriverprefs.py; do		\
[2019-11-04T16:39:40.012Z] 		cp ./$file $file;		\
[2019-11-04T16:39:40.012Z] 	done;						\
[2019-11-04T16:39:40.012Z] fi
[2019-11-04T16:39:40.012Z] /usr/bin/mkdir -p cupshelpers
[2019-11-04T16:39:40.012Z] sed \
[2019-11-04T16:39:40.012Z]   -e "s|\@prefix\@|/usr|" \
[2019-11-04T16:39:40.012Z]   -e "s|\@sysconfdir\@|/etc|" \
[2019-11-04T16:39:40.012Z]   -e "s|\@cupsserverbindir\@|/usr/lib/cups|" \
[2019-11-04T16:39:40.012Z]   cupshelpers/config.py.in > cupshelpers/config.py
[2019-11-04T16:39:40.012Z] touch .stamp-distutils-in-builddir
[2019-11-04T16:39:40.012Z] gcc -DPACKAGE_NAME=\"system-config-printer\" -DPACKAGE_TARNAME=\"system-config-printer\" -DPACKAGE_VERSION=\"1.5.12\" -DPACKAGE_STRING=\"system-config-printer\ 1.5.12\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"system-config-printer\" -DVERSION=\"1.5.12\" -DENABLE_NLS=1 -DHAVE_GETTEXT=1 -DHAVE_DCGETTEXT=1 -I.   -D_FORTIFY_SOURCE=2  -I/usr/include/libusb-1.0  -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include  -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -MT udev/udev_configure_printer-udev-configure-printer.o -MD -MP -MF udev/.deps/udev_configure_printer-udev-configure-printer.Tpo -c -o udev/udev_configure_printer-udev-configure-printer.o `test -f 'udev/udev-configure-printer.c' || echo './'`udev/udev-configure-printer.c
[2019-11-04T16:39:40.263Z] /usr/bin/python setup.py build
[2019-11-04T16:39:40.263Z] udev/udev-configure-printer.c: In function ‘find_matching_device_uris’:
[2019-11-04T16:39:40.263Z] udev/udev-configure-printer.c:1024:3: warning: ‘httpConnectEncrypt’ is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations]
[2019-11-04T16:39:40.263Z]  1024 |   cups = httpConnectEncrypt (cupsServer (), ippPort(), cupsEncryption ());
[2019-11-04T16:39:40.263Z]       |   ^~~~
[2019-11-04T16:39:40.263Z] In file included from /usr/include/cups/ipp.h:18,
[2019-11-04T16:39:40.263Z]                  from /usr/include/cups/cups.h:27,
[2019-11-04T16:39:40.263Z]                  from udev/udev-configure-printer.c:36:
[2019-11-04T16:39:40.263Z] /usr/include/cups/http.h:458:17: note: declared here
[2019-11-04T16:39:40.263Z]   458 | extern http_t  *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead.");
[2019-11-04T16:39:40.263Z]       |                 ^~~~~~~~~~~~~~~~~~
[2019-11-04T16:39:40.263Z] udev/udev-configure-printer.c: In function ‘for_each_matching_queue’:
[2019-11-04T16:39:40.263Z] udev/udev-configure-printer.c:1351:3: warning: ‘httpConnectEncrypt’ is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations]
[2019-11-04T16:39:40.263Z]  1351 |   http_t *cups = httpConnectEncrypt (cupsServer (), ippPort (),
[2019-11-04T16:39:40.263Z]       |   ^~~~~~
[2019-11-04T16:39:40.263Z] In file included from /usr/include/cups/ipp.h:18,
[2019-11-04T16:39:40.263Z]                  from /usr/include/cups/cups.h:27,
[2019-11-04T16:39:40.263Z]                  from udev/udev-configure-printer.c:36:
[2019-11-04T16:39:40.263Z] /usr/include/cups/http.h:458:17: note: declared here
[2019-11-04T16:39:40.263Z]   458 | extern http_t  *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead.");
[2019-11-04T16:39:40.263Z]       |                 ^~~~~~~~~~~~~~~~~~
[2019-11-04T16:39:40.263Z] running build
[2019-11-04T16:39:40.263Z] running build_py
[2019-11-04T16:39:40.263Z] udev/udev-configure-printer.c: In function ‘enable_queue’:
[2019-11-04T16:39:40.263Z] udev/udev-configure-printer.c:1529:3: warning: ‘httpConnectEncrypt’ is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations]
[2019-11-04T16:39:40.263Z]  1529 |   http_t *cups = httpConnectEncrypt (cupsServer (), ippPort (),
[2019-11-04T16:39:40.263Z]       |   ^~~~~~
[2019-11-04T16:39:40.263Z] In file included from /usr/include/cups/ipp.h:18,
[2019-11-04T16:39:40.263Z]                  from /usr/include/cups/cups.h:27,
[2019-11-04T16:39:40.263Z]                  from udev/udev-configure-printer.c:36:
[2019-11-04T16:39:40.263Z] /usr/include/cups/http.h:458:17: note: declared here
[2019-11-04T16:39:40.263Z]   458 | extern http_t  *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead.");
[2019-11-04T16:39:40.263Z]       |                 ^~~~~~~~~~~~~~~~~~
[2019-11-04T16:39:40.263Z] creating build
[2019-11-04T16:39:40.263Z] creating build/lib
[2019-11-04T16:39:40.263Z] creating build/lib/cupshelpers
[2019-11-04T16:39:40.263Z] copying cupshelpers/cupshelpers.py -> build/lib/cupshelpers
[2019-11-04T16:39:40.263Z] udev/udev-configure-printer.c: In function ‘remove_queue’:
[2019-11-04T16:39:40.263Z] udev/udev-configure-printer.c:1720:3: warning: ‘httpConnectEncrypt’ is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations]
[2019-11-04T16:39:40.263Z]  1720 |   http_t *cups = httpConnectEncrypt (cupsServer (), ippPort (),
[2019-11-04T16:39:40.263Z]       |   ^~~~~~
[2019-11-04T16:39:40.263Z] In file included from /usr/include/cups/ipp.h:18,
[2019-11-04T16:39:40.263Z]                  from /usr/include/cups/cups.h:27,
[2019-11-04T16:39:40.263Z]                  from udev/udev-configure-printer.c:36:
[2019-11-04T16:39:40.263Z] /usr/include/cups/http.h:458:17: note: declared here
[2019-11-04T16:39:40.263Z]   458 | extern http_t  *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead.");
[2019-11-04T16:39:40.263Z]       |                 ^~~~~~~~~~~~~~~~~~
[2019-11-04T16:39:40.263Z] copying cupshelpers/openprinting.py -> build/lib/cupshelpers
[2019-11-04T16:39:40.263Z] udev/udev-configure-printer.c: In function ‘disable_queue’:
[2019-11-04T16:39:40.263Z] udev/udev-configure-printer.c:1752:3: warning: ‘httpConnectEncrypt’ is deprecated: Use httpConnect2 instead. [-Wdeprecated-declarations]
[2019-11-04T16:39:40.263Z]  1752 |   http_t *cups = httpConnectEncrypt (cupsServer (), ippPort (),
[2019-11-04T16:39:40.263Z]       |   ^~~~~~
[2019-11-04T16:39:40.263Z] In file included from /usr/include/cups/ipp.h:18,
[2019-11-04T16:39:40.263Z]                  from /usr/include/cups/cups.h:27,
[2019-11-04T16:39:40.263Z]                  from udev/udev-configure-printer.c:36:
[2019-11-04T16:39:40.263Z] /usr/include/cups/http.h:458:17: note: declared here
[2019-11-04T16:39:40.263Z]   458 | extern http_t  *httpConnectEncrypt(const char *host, int port, http_encryption_t encryption) _CUPS_DEPRECATED_1_7_MSG("Use httpConnect2 instead.");
[2019-11-04T16:39:40.263Z]       |                 ^~~~~~~~~~~~~~~~~~
[2019-11-04T16:39:40.263Z] copying cupshelpers/config.py -> build/lib/cupshelpers
[2019-11-04T16:39:40.263Z] copying cupshelpers/xmldriverprefs.py -> build/lib/cupshelpers
[2019-11-04T16:39:40.263Z] copying cupshelpers/ppds.py -> build/lib/cupshelpers
[2019-11-04T16:39:40.263Z] copying cupshelpers/__init__.py -> build/lib/cupshelpers
[2019-11-04T16:39:40.263Z] copying cupshelpers/installdriver.py -> build/lib/cupshelpers
[2019-11-04T16:39:40.263Z] Warn: AUTHOR sect.: no personblurb|contrib for Tim Waugh           
[2019-11-04T16:39:40.263Z] Note: AUTHOR sect.: see http://www.docbook.org/tdg5/en/html/contr  
[2019-11-04T16:39:40.263Z] Note: AUTHOR sect.: see http://www.docbook.org/tdg5/en/html/perso  
[2019-11-04T16:39:40.514Z] Note: Writing system-config-printer.1
[2019-11-04T16:39:40.514Z] Warn: AUTHOR sect.: no personblurb|contrib for Tim Waugh           
[2019-11-04T16:39:40.514Z] Note: AUTHOR sect.: see http://www.docbook.org/tdg5/en/html/contr  
[2019-11-04T16:39:40.514Z] Note: AUTHOR sect.: see http://www.docbook.org/tdg5/en/html/perso  
[2019-11-04T16:39:40.764Z] mv -f udev/.deps/udev_configure_printer-udev-configure-printer.Tpo udev/.deps/udev_configure_printer-udev-configure-printer.Po
[2019-11-04T16:39:40.764Z] Note: Writing system-config-printer-applet.1
[2019-11-04T16:39:40.764Z] gcc  -I/usr/include/libusb-1.0  -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include  -march=x86-64 -mtune=generic -O2 -pipe -fno-plt  -Wl,-O1,--sort-common,--as-needed,-z,relro,-z,now -o udev/udev-configure-printer udev/udev_configure_printer-udev-configure-printer.o -lcups -ludev -lusb-1.0  -lglib-2.0  
[2019-11-04T16:39:40.764Z] touch .stamp-man-pages-built
[2019-11-04T16:39:40.764Z] Generating and caching the translation database
[2019-11-04T16:39:40.764Z] Merging translations into system-config-printer.desktop.
[2019-11-04T16:39:40.764Z] Generating and caching the translation database
[2019-11-04T16:39:40.764Z] Merging translations into print-applet.desktop.
[2019-11-04T16:39:40.764Z] Generating and caching the translation database
[2019-11-04T16:39:40.764Z] Merging translations into system-config-printer.appdata.xml.
[2019-11-04T16:39:40.764Z] CREATED system-config-printer.appdata.xml
[2019-11-04T16:39:40.764Z] make[1]: Leaving directory '/build/system-config-printer/src/system-config-printer-1.5.12'
[2019-11-04T16:39:40.764Z] ==> Entering fakeroot environment...
[2019-11-04T16:39:42.107Z] ==> Starting package()...
[2019-11-04T16:39:42.107Z] Making install in po
[2019-11-04T16:39:42.107Z] make[1]: Entering directory '/build/system-config-printer/src/system-config-printer-1.5.12/po'
[2019-11-04T16:39:42.107Z] linguas="ar as bg bn_IN bn br bs ca cs cy da de el en_GB es et fa fi fr gu he hi hr hu id is it ja kn ko lt lv mai ml mr ms nb nds nl nn or pa pl pt_BR pt ro ru si sk sl sr at latin sr sv ta te th tr uk vi zh_CN zh_TW "; \
[2019-11-04T16:39:42.107Z] for lang in $linguas; do \
[2019-11-04T16:39:42.107Z]   dir=/build/system-config-printer/pkg/system-config-printer/usr/share/locale/$lang/LC_MESSAGES; \
[2019-11-04T16:39:42.107Z]   /bin/sh /build/system-config-printer/src/system-config-printer-1.5.12/install-sh -d $dir; \
[2019-11-04T16:39:42.107Z]   if test -r $lang.gmo; then \
[2019-11-04T16:39:42.107Z]     /usr/bin/install -c -m 644 $lang.gmo $dir/system-config-printer.mo; \
[2019-11-04T16:39:42.107Z]     echo "installing $lang.gmo as $dir/system-config-printer.mo"; \
[2019-11-04T16:39:42.107Z]   else \
[2019-11-04T16:39:42.107Z]     /usr/bin/install -c -m 644 ./$lang.gmo $dir/system-config-printer.mo; \
[2019-11-04T16:39:42.107Z]     echo "installing ./$lang.gmo as" \
[2019-11-04T16:39:42.107Z] 	 "$dir/system-config-printer.mo"; \
[2019-11-04T16:39:42.107Z]   fi; \
[2019-11-04T16:39:42.107Z]   if test -r $lang.gmo.m; then \
[2019-11-04T16:39:42.107Z]     /usr/bin/install -c -m 644 $lang.gmo.m $dir/system-config-printer.mo.m; \
[2019-11-04T16:39:42.107Z]     echo "installing $lang.gmo.m as $dir/system-config-printer.mo.m"; \
[2019-11-04T16:39:42.107Z]   else \
[2019-11-04T16:39:42.107Z]     if test -r ./$lang.gmo.m ; then \
[2019-11-04T16:39:42.107Z]       /usr/bin/install -c -m 644 ./$lang.gmo.m \
[2019-11-04T16:39:42.107Z] 	$dir/system-config-printer.mo.m; \
[2019-11-04T16:39:42.107Z]       echo "installing ./$lang.gmo.m as" \
[2019-11-04T16:39:42.107Z] 	   "$dir/system-config-printer.mo.m"; \
[2019-11-04T16:39:42.107Z]     else \
[2019-11-04T16:39:42.107Z]       true; \
[2019-11-04T16:39:42.107Z]     fi; \
[2019-11-04T16:39:42.107Z]   fi; \
[2019-11-04T16:39:42.107Z] done
[2019-11-04T16:39:42.358Z] installing ar.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/ar/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:42.358Z] installing as.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/as/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:42.358Z] installing bg.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/bg/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:42.358Z] installing bn_IN.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/bn_IN/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:42.358Z] installing bn.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/bn/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:42.358Z] installing br.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/br/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:42.358Z] installing bs.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/bs/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:42.358Z] installing ca.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/ca/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:42.608Z] installing cs.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/cs/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:42.608Z] installing cy.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/cy/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:42.608Z] installing da.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/da/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:42.608Z] installing de.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/de/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:42.608Z] installing el.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/el/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:42.608Z] installing en_GB.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/en_GB/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:42.608Z] installing es.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/es/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:42.608Z] installing et.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/et/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:42.608Z] installing fa.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/fa/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:42.859Z] installing fi.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/fi/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:42.859Z] installing fr.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/fr/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:42.859Z] installing gu.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/gu/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:42.859Z] installing he.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/he/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:42.859Z] installing hi.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/hi/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:42.859Z] installing hr.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/hr/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:42.859Z] installing hu.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/hu/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:42.859Z] installing id.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/id/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:42.859Z] installing is.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/is/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:42.859Z] installing it.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/it/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:43.109Z] installing ja.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/ja/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:43.109Z] installing kn.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/kn/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:43.109Z] installing ko.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/ko/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:43.109Z] installing lt.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/lt/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:43.109Z] installing lv.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/lv/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:43.109Z] installing mai.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/mai/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:43.109Z] installing ml.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/ml/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:43.109Z] installing mr.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/mr/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:43.359Z] installing ms.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/ms/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:43.359Z] installing nb.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/nb/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:43.359Z] installing nds.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/nds/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:43.359Z] installing nl.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/nl/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:43.359Z] installing nn.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/nn/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:43.360Z] installing or.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/or/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:43.360Z] installing pa.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/pa/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:43.360Z] installing pl.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/pl/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:43.360Z] installing pt_BR.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/pt_BR/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:43.610Z] installing pt.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/pt/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:43.610Z] installing ro.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/ro/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:43.610Z] installing ru.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/ru/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:43.610Z] installing si.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/si/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:43.610Z] installing sk.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/sk/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:43.610Z] installing sl.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/sl/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:43.610Z] installing sr at latin.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/sr at latin/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:43.610Z] installing sr.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/sr/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:43.610Z] installing sv.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/sv/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:43.610Z] installing ta.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/ta/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:43.860Z] installing te.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/te/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:43.860Z] installing th.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/th/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:43.860Z] installing tr.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/tr/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:43.860Z] installing uk.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/uk/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:43.860Z] installing vi.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/vi/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:43.860Z] installing zh_CN.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/zh_CN/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:43.860Z] installing zh_TW.gmo as /build/system-config-printer/pkg/system-config-printer/usr/share/locale/zh_TW/LC_MESSAGES/system-config-printer.mo
[2019-11-04T16:39:43.860Z] make[1]: Leaving directory '/build/system-config-printer/src/system-config-printer-1.5.12/po'
[2019-11-04T16:39:43.860Z] make[1]: Entering directory '/build/system-config-printer/src/system-config-printer-1.5.12'
[2019-11-04T16:39:43.860Z] /usr/bin/python setup.py build
[2019-11-04T16:39:44.111Z] running build
[2019-11-04T16:39:44.111Z] running build_py
[2019-11-04T16:39:44.111Z] make[2]: Entering directory '/build/system-config-printer/src/system-config-printer-1.5.12'
[2019-11-04T16:39:44.111Z] /usr/bin/python setup.py install --prefix=/build/system-config-printer/pkg/system-config-printer/usr
[2019-11-04T16:39:44.111Z] mkdir -p /build/system-config-printer/pkg/system-config-printer/usr/share/applications/
[2019-11-04T16:39:44.111Z]  /usr/bin/mkdir -p '/build/system-config-printer/pkg/system-config-printer/etc/cupshelpers'
[2019-11-04T16:39:44.111Z]  /usr/bin/mkdir -p '/build/system-config-printer/pkg/system-config-printer/usr/bin'
[2019-11-04T16:39:44.111Z]  /usr/bin/mkdir -p '/build/system-config-printer/pkg/system-config-printer/usr/share/man/man1'
[2019-11-04T16:39:44.111Z] mkdir -p /build/system-config-printer/pkg/system-config-printer/usr/share/applications/
[2019-11-04T16:39:44.111Z] desktop-file-install 	\
[2019-11-04T16:39:44.111Z]   --dir /build/system-config-printer/pkg/system-config-printer/usr/share/applications/		\
[2019-11-04T16:39:44.111Z]   --add-category System			\
[2019-11-04T16:39:44.111Z]   --add-category Settings		\
[2019-11-04T16:39:44.111Z]   --add-category HardwareSettings	\
[2019-11-04T16:39:44.111Z]   --add-category Printing		\
[2019-11-04T16:39:44.111Z]   --add-category GTK			\
[2019-11-04T16:39:44.111Z]   system-config-printer.desktop
[2019-11-04T16:39:44.111Z]  /usr/bin/mkdir -p '/build/system-config-printer/pkg/system-config-printer/usr/share/metainfo'
[2019-11-04T16:39:44.111Z]  /usr/bin/mkdir -p '/build/system-config-printer/pkg/system-config-printer/usr/share/dbus-1/interfaces/'
[2019-11-04T16:39:44.111Z]  /usr/bin/mkdir -p '/build/system-config-printer/pkg/system-config-printer/etc/dbus-1/system.d/'
[2019-11-04T16:39:44.111Z]  /usr/bin/install -c -m 644 xml/preferreddrivers.xml '/build/system-config-printer/pkg/system-config-printer/etc/cupshelpers'
[2019-11-04T16:39:44.111Z]  /usr/bin/mkdir -p '/build/system-config-printer/pkg/system-config-printer/usr/share/system-config-printer'
[2019-11-04T16:39:44.111Z]  /usr/bin/mkdir -p '/build/system-config-printer/pkg/system-config-printer/usr/share/system-config-printer'
[2019-11-04T16:39:44.111Z]  /usr/bin/install -c system-config-printer install-printerdriver system-config-printer-applet dbus/scp-dbus-service '/build/system-config-printer/pkg/system-config-printer/usr/bin'
[2019-11-04T16:39:44.111Z]  /usr/bin/mkdir -p '/build/system-config-printer/pkg/system-config-printer/usr/share/dbus-1/services/'
[2019-11-04T16:39:44.111Z]  /usr/bin/install -c -m 644 dbus/com.redhat.NewPrinterNotification.conf dbus/com.redhat.PrinterDriversInstaller.conf '/build/system-config-printer/pkg/system-config-printer/etc/dbus-1/system.d/'
[2019-11-04T16:39:44.111Z]  /usr/bin/install -c -m 644 dbus/org.fedoraproject.Config.Printing.xml '/build/system-config-printer/pkg/system-config-printer/usr/share/dbus-1/interfaces/'
[2019-11-04T16:39:44.111Z]  /usr/bin/install -c -m 644 system-config-printer.appdata.xml '/build/system-config-printer/pkg/system-config-printer/usr/share/metainfo'
[2019-11-04T16:39:44.111Z]  /usr/bin/install -c -m 644 man/system-config-printer.1 man/system-config-printer-applet.1 '/build/system-config-printer/pkg/system-config-printer/usr/share/man/man1'
[2019-11-04T16:39:44.111Z]  /usr/bin/install -c -m 644 dbus/org.fedoraproject.Config.Printing.service '/build/system-config-printer/pkg/system-config-printer/usr/share/dbus-1/services/'
[2019-11-04T16:39:44.111Z] desktop-file-install 	\
[2019-11-04T16:39:44.111Z]   --dir /build/system-config-printer/pkg/system-config-printer/etc/xdg/autostart/	\
[2019-11-04T16:39:44.111Z]   --add-category System			\
[2019-11-04T16:39:44.111Z]   --add-category Monitor		\
[2019-11-04T16:39:44.111Z]   --add-category GTK			\
[2019-11-04T16:39:44.111Z]   print-applet.desktop
[2019-11-04T16:39:44.111Z]  /usr/bin/mkdir -p '/build/system-config-printer/pkg/system-config-printer/usr/share/system-config-printer/troubleshoot/'
[2019-11-04T16:39:44.111Z]  /usr/bin/mkdir -p '/build/system-config-printer/pkg/system-config-printer/usr/share/system-config-printer/troubleshoot'
[2019-11-04T16:39:44.111Z]  /usr/bin/install -c troubleshoot/__init__.py '/build/system-config-printer/pkg/system-config-printer/usr/share/system-config-printer/troubleshoot/'
[2019-11-04T16:39:44.111Z]  /usr/bin/mkdir -p '/build/system-config-printer/pkg/system-config-printer/usr/lib/udev'
[2019-11-04T16:39:44.111Z]  /usr/bin/install -c -m 644  troubleshoot/base.py troubleshoot/CheckLocalServerPublishing.py troubleshoot/CheckNetworkServerSanity.py troubleshoot/CheckPPDSanity.py troubleshoot/CheckPrinterSanity.py troubleshoot/CheckSELinux.py troubleshoot/CheckUSBPermissions.py troubleshoot/ChooseNetworkPrinter.py troubleshoot/ChoosePrinter.py troubleshoot/DeviceListed.py troubleshoot/ErrorLogCheckpoint.py troubleshoot/ErrorLogFetch.py troubleshoot/ErrorLogParse.py troubleshoot/Locale.py troubleshoot/LocalOrRemote.py troubleshoot/NetworkCUPSPrinterShared.py troubleshoot/PrinterStateReasons.py troubleshoot/PrintTestPage.py troubleshoot/QueueNotEnabled.py troubleshoot/QueueRejectingJobs.py troubleshoot/RemoteAddress.py troubleshoot/SchedulerNotRunning.py troubleshoot/ServerFirewalled.py troubleshoot/Shrug.py troubleshoot/VerifyPackages.py troubleshoot/Welcome.py '/build/system-config-printer/pkg/system-config-printer/usr/share/system-config-printer/troubleshoot'
[2019-11-04T16:39:44.111Z]  /usr/bin/install -c check-device-ids.py pysmb.py scp-dbus-service.py system-config-printer.py install-printerdriver.py applet.py '/build/system-config-printer/pkg/system-config-printer/usr/share/system-config-printer'
[2019-11-04T16:39:44.111Z]  /usr/bin/mkdir -p '/build/system-config-printer/pkg/system-config-printer/usr/lib/udev/rules.d'
[2019-11-04T16:39:44.111Z]  /usr/bin/mkdir -p '/build/system-config-printer/pkg/system-config-printer/usr/lib/udev'
[2019-11-04T16:39:44.111Z]  /usr/bin/mkdir -p '/build/system-config-printer/pkg/system-config-printer/usr/share/system-config-printer/ui'
[2019-11-04T16:39:44.111Z]  /usr/bin/install -c -m 644  ui/AboutDialog.ui ui/ConnectDialog.ui ui/ConnectingDialog.ui ui/InstallDialog.ui ui/JobsWindow.ui ui/NewPrinterName.ui ui/NewPrinterWindow.ui ui/PrinterPropertiesDialog.ui ui/PrintersWindow.ui ui/ServerSettingsDialog.ui ui/SMBBrowseDialog.ui ui/statusicon_popupmenu.ui ui/WaitWindow.ui '/build/system-config-printer/pkg/system-config-printer/usr/share/system-config-printer/ui'
[2019-11-04T16:39:44.111Z]   /usr/bin/install -c udev/udev-configure-printer '/build/system-config-printer/pkg/system-config-printer/usr/lib/udev'
[2019-11-04T16:39:44.111Z]  /usr/bin/install -c -m 644 udev/70-printers.rules '/build/system-config-printer/pkg/system-config-printer/usr/lib/udev/rules.d'
[2019-11-04T16:39:44.112Z]  /usr/bin/install -c udev/udev-add-printer '/build/system-config-printer/pkg/system-config-printer/usr/lib/udev'
[2019-11-04T16:39:44.112Z]  /usr/bin/install -c -m 644  asyncconn.py asyncipp.py asyncpk1.py authconn.py config.py cupspk.py debug.py dnssdresolve.py errordialogs.py HIG.py firewallsettings.py gui.py gtkinklevel.py installpackage.py jobviewer.py killtimer.py monitor.py newprinter.py OpenPrintingRequest.py options.py optionwidgets.py PhysicalDevice.py ppdcache.py ppdippstr.py ppdsloader.py printerproperties.py probe_printer.py SearchCriterion.py serversettings.py smburi.py statereason.py timedops.py ToolbarSearchEntry.py userdefault.py '/build/system-config-printer/pkg/system-config-printer/usr/share/system-config-printer/.'
[2019-11-04T16:39:44.112Z]  /usr/bin/mkdir -p '/build/system-config-printer/pkg/system-config-printer/usr/share/system-config-printer/xml'
[2019-11-04T16:39:44.112Z]  /usr/bin/install -c -m 644  xml/preferreddrivers.rng xml/validate.py '/build/system-config-printer/pkg/system-config-printer/usr/share/system-config-printer/xml'
[2019-11-04T16:39:44.112Z]  /usr/bin/mkdir -p '/build/system-config-printer/pkg/system-config-printer/usr/share/system-config-printer/icons'
[2019-11-04T16:39:44.112Z]  /usr/bin/install -c -m 644  icons/i-network-printer.png '/build/system-config-printer/pkg/system-config-printer/usr/share/system-config-printer/icons'
[2019-11-04T16:39:44.112Z] running install
[2019-11-04T16:39:44.112Z] running build
[2019-11-04T16:39:44.112Z] running build_py
[2019-11-04T16:39:44.112Z] running install_lib
[2019-11-04T16:39:44.112Z] creating /build/system-config-printer/pkg/system-config-printer/usr/lib/python3.8
[2019-11-04T16:39:44.112Z] creating /build/system-config-printer/pkg/system-config-printer/usr/lib/python3.8/site-packages
[2019-11-04T16:39:44.112Z] creating /build/system-config-printer/pkg/system-config-printer/usr/lib/python3.8/site-packages/cupshelpers
[2019-11-04T16:39:44.112Z] copying build/lib/cupshelpers/cupshelpers.py -> /build/system-config-printer/pkg/system-config-printer/usr/lib/python3.8/site-packages/cupshelpers
[2019-11-04T16:39:44.112Z] copying build/lib/cupshelpers/openprinting.py -> /build/system-config-printer/pkg/system-config-printer/usr/lib/python3.8/site-packages/cupshelpers
[2019-11-04T16:39:44.112Z] copying build/lib/cupshelpers/config.py -> /build/system-config-printer/pkg/system-config-printer/usr/lib/python3.8/site-packages/cupshelpers
[2019-11-04T16:39:44.112Z] copying build/lib/cupshelpers/xmldriverprefs.py -> /build/system-config-printer/pkg/system-config-printer/usr/lib/python3.8/site-packages/cupshelpers
[2019-11-04T16:39:44.112Z] copying build/lib/cupshelpers/ppds.py -> /build/system-config-printer/pkg/system-config-printer/usr/lib/python3.8/site-packages/cupshelpers
[2019-11-04T16:39:44.112Z] copying build/lib/cupshelpers/__init__.py -> /build/system-config-printer/pkg/system-config-printer/usr/lib/python3.8/site-packages/cupshelpers
[2019-11-04T16:39:44.112Z] copying build/lib/cupshelpers/installdriver.py -> /build/system-config-printer/pkg/system-config-printer/usr/lib/python3.8/site-packages/cupshelpers
[2019-11-04T16:39:44.112Z] byte-compiling /build/system-config-printer/pkg/system-config-printer/usr/lib/python3.8/site-packages/cupshelpers/cupshelpers.py to cupshelpers.cpython-38.pyc
[2019-11-04T16:39:44.112Z] byte-compiling /build/system-config-printer/pkg/system-config-printer/usr/lib/python3.8/site-packages/cupshelpers/openprinting.py to openprinting.cpython-38.pyc
[2019-11-04T16:39:44.112Z] byte-compiling /build/system-config-printer/pkg/system-config-printer/usr/lib/python3.8/site-packages/cupshelpers/config.py to config.cpython-38.pyc
[2019-11-04T16:39:44.112Z] byte-compiling /build/system-config-printer/pkg/system-config-printer/usr/lib/python3.8/site-packages/cupshelpers/xmldriverprefs.py to xmldriverprefs.cpython-38.pyc
[2019-11-04T16:39:44.112Z] byte-compiling /build/system-config-printer/pkg/system-config-printer/usr/lib/python3.8/site-packages/cupshelpers/ppds.py to ppds.cpython-38.pyc
[2019-11-04T16:39:44.112Z] byte-compiling /build/system-config-printer/pkg/system-config-printer/usr/lib/python3.8/site-packages/cupshelpers/__init__.py to __init__.cpython-38.pyc
[2019-11-04T16:39:44.112Z] byte-compiling /build/system-config-printer/pkg/system-config-printer/usr/lib/python3.8/site-packages/cupshelpers/installdriver.py to installdriver.cpython-38.pyc
[2019-11-04T16:39:44.112Z] running install_egg_info
[2019-11-04T16:39:44.112Z] Writing /build/system-config-printer/pkg/system-config-printer/usr/lib/python3.8/site-packages/cupshelpers-1.0-py3.8.egg-info
[2019-11-04T16:39:44.112Z] make[2]: Leaving directory '/build/system-config-printer/src/system-config-printer-1.5.12'
[2019-11-04T16:39:44.112Z] make[1]: Leaving directory '/build/system-config-printer/src/system-config-printer-1.5.12'
[2019-11-04T16:39:44.663Z] sed: can't read /build/system-config-printer/pkg/system-config-printer/usr/lib/systemd/system/configure-printer at .service: No such file or directory
[2019-11-04T16:39:44.663Z] ==> ERROR: A failure occurred in package().
[2019-11-04T16:39:44.663Z]     Aborting...
[2019-11-04T16:39:45.573Z] ==> ERROR: Build failed, check /build/buildpkg/goblins-x86_64/jenkins/build
[Pipeline] }
[Pipeline] // dir
Post stage
[Pipeline] emailext
[2019-11-04T16:39:45.666Z] Sending email to: artix-build-failures at artixlinux.org


More information about the artix-build-failures mailing list