Dear Xavier,
> In conclusion: make custom kernel with 6.1 with adds from 6.10 and then test it?
If you have narrowed down where the cause could exist as you have
already written, I don't see much point in including the latest codes in
your search.
> I have a lots of traces debugs in dmesg when I use nouveu driver in kernel > 6.1 but in kernel 6.1 all is fine.
Best regards,
ikedaC
On 7/27/24 10:29 PM, Xavier B. wrote:
> What do you mean?
>
> In conclusion: make custom kernel with 6.1 with adds from 6.10 and then test it?
> But is there any way to test which part of 6.10 fail? Which log I have to inspect? /var/log/error.log provides a lot of information:
>
> Jul 26 13:12:41 coronari kernel: nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 6013d4 [ TIMEOUT ]
> Jul 26 13:12:43 coronari kernel: nouveau 0000:01:00.0: gr: init failed, -16
> Jul 26 13:12:44 coronari kernel: nouveau 0000:01:00.0: sec2:cmdq: timeout waiting for reply
> Jul 26 13:12:46 coronari kernel: nouveau 0000:01:00.0: init failed with -16
> Jul 26 13:12:46 coronari kernel: nouveau: DRM-master:00000000:00000080: init failed with -16
> Jul 26 13:12:46 coronari kernel: nouveau: DRM-master:00000000:00000000: init failed with -16
> Jul 26 13:12:46 coronari kernel: nouveau 0000:01:00.0: DRM: Client resume failed with error: -16
> Jul 26 13:12:46 coronari kernel: nouveau 0000:01:00.0: DRM: resume failed with: -16
> Jul 26 13:13:01 coronari kernel: nouveau 0000:01:00.0: Xorg[2713]: failed to idle channel 3 [Xorg[2713]]
>
> but I don't know what exacty fails!
>
> Thanks in advance,
>
> On Fri, 26 Jul 2024 21:05:33 +0900
> "www.miraa.jp" <info at miraa.sakura.ne.jp> ha escrit:
>
>> Dear Xavier,
>>
>>> I did not find anything.
>> I hope the following links will help you.
>>
>> -
>> https://docs.kernel.org/admin-guide/verify-bugs-and-bisect-regressions.html#the-essence-of-the-process-aka-tl-dr
>> - https://git-scm.com/docs/git-bisect
>>
>> Best regards,
>> ikedaC
>>
>> On 7/26/24 8:38 PM, Xavier B. wrote:
>>> I did not find anything.
>>>
>>> For temporary workarround, I disabled nouveau from kernel:
>>>
>>> nouveau.modeset=0 i915.modeset=1
>>>
>>> in /etc/default/grub
>>>
>>> but the bug is still present if I remove that line in grub.
>>>
>>>
>>> On Fri, 26 Jul 2024 13:48:56 +0300
>>> Christos Nouskas <nous at artixlinux.org> ha escrit:
>>>
>>>> The recommended way is bisecting the kernel (google it).
>>>>
>>>> On July 25, 2024 11:34:30 PM GMT+03:00, "Xavier B." <somenxavier at posteo.net> wrote:
>>>>> It happens in ALL linux-lts61.
>>>>>
>>>>> Any hints?
>>>>>
>>>>> On Wed, 17 Jul 2024 21:15:39 +0200
>>>>> "Xavier B." <somenxavier at posteo.net> ha escrit:
>>>>>
>>>>>> Hi,
>>>>>>
>>>>>> I have a lots of traces debugs in dmesg when I use nouveu driver in kernel > 6.1 but in kernel 6.1 all is fine.
>>>>>> I want to triage the bug, but I need help. Where do I start?
>>>>>>
>>>>>> Thanks in advance,
>>>>>> Xavier
>>>>> --
>>>>> artix-general mailing list
>>>>> artix-general at artixlinux.org
>>>>> https://lists.artixlinux.org/listinfo/artix-general
>> --------------------
>> ikedaC
>> info at miraa.sakura.ne.jp
>> http(s)://www.miraa.jp/
>>
>> --
>> artix-general mailing list
>> artix-general at artixlinux.org
>> https://lists.artixlinux.org/listinfo/artix-general
--------------------
ikedaC
info at miraa.sakura.ne.jp
http(s)://www.miraa.jp/
More information about the artix-general
mailing list